sfh 4010 ir-lumineszenzdiode infrared emitter lead (pb) free produc t - rohs compliant 2008-10-20 1 wesentliche merkmale ? sehr kleines geh?use: (lxbxh) 1,7 mm x 0,8 mm x 0,65 mm ? typische peakwellenl?nge 950 nm ? gegurtet lieferbar anwendungen ? miniaturlichtschranken fr gleich- und wechsellichtbetrieb ? industrieelektronik ? ?messen/steuern/regeln? ? sensorik ? alarm- und sicherungssysteme ? ir-freiraumbertragung typ type bestellnummer ordering code strahlst?rkegruppierung 1) ( i f = 100 ma, t p = 20 ms) radiant intensity grouping 1) i e (mw/sr) 1) gemessen bei einem raumwinkel = 0.01 sr / measured at a solid angle of = 0.01 sr sfh 4010 q65110a6459 > 1.0 (typ. 2.5) features ? very small package: (lxwxh) 1.7 mm x 0.8 mm x 0.65 mm ? typical peak wavelength 950 nm ? available on tape and reel applications ? miniature photointerrupters ? industrial electronics ? for drive and control circuits ? sensor technology ? alarm and safety equipment ? ir free air transmission nicht fr neuentwicklungen im automobilbereich / not for new designs in automotive applications
2008-10-20 2 sfh 4010 grenzwerte ( t a = 25 c) maximum ratings bezeichnung parameter symbol symbol wert value einheit unit betriebs- und lagertemperatur operating and storage temperature range t op ; t stg ? 40 + 100 c sperrspannung reverse voltage v r 5 v durchlassstrom forward current i f 100 ma sto?strom, = 10 s, d = 0 surge current i fsm 3 a verlustleistung power dissipation p tot 160 mw w?rmewiderstand sperrschicht - umgebung bei montage auf fr4 platine, padgr??e je 5 mm 2 thermal resistance junction - ambient mounted on pc-board (fr4), padsize 5 mm 2 each w?rmewiderstand sperrschicht - l?tstelle bei montage auf metall-block thermal resistance junc tion - soldering point, mounted on metal block r thja r thjs 450 250 k/w k/w
sfh 4010 2008-10-20 3 kennwerte ( t a = 25 c) characteristics bezeichnung parameter symbol symbol wert value einheit unit wellenl?nge der strahlung wavelength at peak emission i f = 100 ma, t p = 20 ms peak 950 nm spektrale bandbreite bei 50% von i max spectral bandwidth at 50% of i max i f = 100 m a ? 55 nm abstrahlwinkel half angle ? 80 grad deg. aktive chipfl?che active chip area a 0.09 mm 2 abmessungen der aktiven chipfl?che dimensions of the active chip area l b l w 0.3 0.3 mm2 schaltzeiten, i e von 10% auf 90% und von 90% auf 10%, bei i f = 100 ma, r l = 50 switching times, e from 10% to 90% and from 90% to 10%, i f = 100 ma, r l = 50 t r , t f 0.5 s kapazit?t capacitance v r = 0 v, f = 1 mhz c o 25 pf durchlassspannung forward voltage i f = 100 ma, t p = 20 ms i f = 1 a, t p = 100 s v f v f 1.3 ( 1.5) 1.9 ( 2.5) v v sperrstrom reverse current v r = 5 v i r 0.01 ( 1) a gesamtstrahlungsfluss total radiant flux i f = 100 ma, t p = 20 ms e 20 mw temperaturkoeffizient von i e bzw. e , i f = 100 ma temperature coefficient of i e or e , i f = 100 ma tc i ? 0.55 %/k temperaturkoeffizient von v f , i f = 100 ma temperature coefficient of v f , i f = 100 ma tc v ? 2 mv/k temperaturkoeffizient von , i f = 100 ma temperature coefficient of , i f = 100 ma tc + 0.3 nm/k
2008-10-20 4 sfh 4010 strahlst?rke i e in achsrichtung gemessen bei einem raumwinkel = 0.01 sr radiant intensity i e in axial direction at a solid angle of = 0.01 sr bezeichnung parameter symbol werte values einheit unit strahlst?rke radiant intensity i f = 100 ma, t p = 20 ms i e min i e typ 1.0 2.5 mw/sr mw/sr strahlst?rke radiant intensity i f = 1 a, t p = 100 s i e typ 22 mw/sr
sfh 4010 2008-10-20 5 relative spectral emission i rel = f ( ) forward current i f = f ( v f ) single pulse, t p = 20 s radiation characteristics i rel = f ( ?) ohr01938 rel 0 880 920 960 1000 nm 1060 20 40 60 80 % 100 10 ohr01554 f v -3 -2 10 -1 10 0 10 1 10 0123456v8 a f ohf00614 0? 20? 40? 60? 80? 100? 120? 0.4 0.6 0.8 1.0 100? 90? 80? 70? 60? 50? 0? 10? 20? 30? 40? 0 0.2 0.4 0.6 0.8 1.0 ? radiant intensity single pulse, t p = 20 s permissible pulse handling capability i f = f ( t p ), t a = 25 c duty cycle d = parameter e e 100 ma = f ( i f ) ohr01551 10 -3 f -2 10 10 -1 10 0 10 1 10 2 e 100 ma e -2 10 -1 10 0 10 1 10 a a t ohr00860 p -5 10 10 2 f 10 3 10 4 5 dc 0.2 0.5 0.1 0.005 0.01 0.02 0.05 t p t f t p t d = 5 ma -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 s d = max. permissible forward current i f = f ( t a ), r thja = 450 k/w ohr00883 0 f 0 20 40 60 80 100 120 20 40 60 80 100 120 ma ?c t a r thja = 450 k/w
2008-10-20 6 sfh 4010 ma?zeichnung package outlines ma?e in mm (inch) / dimensions in mm (inch). geh?use / package epoxydharz, diffus / epoxy, diffuse farbe / colour farblos / colourless geh?usemarkierung/ package marking kathode / cathode gply7036 0.8 (0.031) 0.1 (0.004) package +0.05 (0.002) -0.03 (0.001) 0.125 (0.005) 1.7 (0.067) 0.1 (0.004) 7? max +0.02 (0.001) -0.05 (0.002) 0.65 (0.026) 5? 1.3 (0.051) 0.1 (0.004) marking marking package 0.05 (0.002) 0.7 (0.028)
sfh 4010 2008-10-20 7 empfohlenes l?tpaddesign reflow l?ten recommended solder pad reflow soldering alternatives l?tpaddesign reflow l?ten alternative solder pad reflow soldering ma?e in mm (inch) / dimensions in mm (inch). 0.8 (0.031) 0.8 (0.031) ohapy606 0.8 (0.031) 0.8 (0.031) copper solder pad ohpy3832 0.8 (0.031) 0.7 (0.028) 0.8 (0.031) 0.05 (0.002) 0.6 (0.024) solder stencil aperture 0.05 (0.002) 0.7 (0.028) copper solder pad
2008-10-20 8 sfh 4010 l?tbedingungen vorbehandlung nach jedec level 2 soldering conditions preconditioning acc. to jedec level 2 reflow l?tprofil fr bleifreies l?ten (nach j-std-020c) reflow soldering profile for lead free soldering (acc. to j-std-020c ) wellenl?ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) ohla0687 0 0 t t ?c s 120 s max 50 100 150 200 250 300 ramp up 100 s max 50 100 150 200 250 300 ramp down 6 k/s (max) 3 k/s (max) 25 ?c 30 s max 260 ?c +0 ?c -5 ?c 245 ?c 5 ?c 240 ?c 255 ?c 217 ?c maximum solder profile recommended solder profile 235 ?c -0 ?c +5 ?c minimum solder profile 10 s min ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangskhlung forced cooling normalkurve standard curve grenzkurven limit curves
sfh 4010 2008-10-20 9 published by osram opto semico nductors gmbh wernerwerkstrasse 2, d-93049 regensburg www.osram-os.com ? all rights reserved. the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserv ed. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. packing please use the recycling operators known to you. we can also help you ? get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of tr ansport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or system s must be expressly authorized for such purpose! critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support de vice or system, or to affect its safety or effectiveness of that device or system. 2 life support devices or systems are intended (a) to be impl anted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered.
|
